The PVC graining machine operation method, after looking at it, is good for you.

3.PVC graining machine operation method.
1. Before starting the machine, it will heat up for about 40 minutes. Raise the temperature to the use of the hand to pull the motor triangle to be comfortable; Press the normal operation to pull eight to ten times. Then continue to warm up for about 10 minutes, then start up, but continue to warm up, because normal production needs to keep adding heat; Vary the temperature according to different properties of plastic.
2. When thePVC graining machine is working normally, the machine temperature should be stable, not high and low. Near the vent hole, until the nose position to maintain a temperature of 200 ℃ or so (c, b).
3. The incoming material should be uniform and sufficient. The feeding speed and feeding speed of the machine should be matched properly. Otherwise, it will affect the quality and yield of the particles.
4. When the machine is down, the main engine should be completely cut off. Machine head plug (with wrench part) must be removed. Preheat until the next use.